本任务已托付任务款：
任务描述
1. General Desc ription 概述
Boiler shall be designed and constructed in accordance with ASME BPV Code Section I, 2015 Edition.
锅炉要依据ASME锅炉压力容器规范2015版第Ⅰ卷进行设计和建造，应有证书标志。
2. Applicable Codes, Specifications and Standards 引用规范、技术要求和标准
ASME Boiler & Pressure Vessel Code Section I 2015 Edition , and all other referenced Sections.
ASME锅炉及压力容器规范第I卷（2015版）以及其它相关部分。
3. Design Data Sheet & Sketch (see attachment)设计数据及简图（见附件）
Max. Allowing working pressure:最大允许工作压力 1.25 MPa
Design Pressure（Including Static Head）:设计压力（含静压头） 1.25 MPa
Working Temperature: 工作温度 194° C
Design Temperature: 设计温度 370° C
Corrosion allowance: 腐蚀余量 1.0 mm
Medium: 介质 water, steam
水，水蒸气
4. LOADINGS ON BOILER 锅炉载荷
There are no any additional stresses imposed by effects other than working pressure and static head.
没有除工作压力和静压头之外引起的附加应力。
5、Strength calculation only need to compute the strength of the boiler pressure parts, which are within the scope of the boiler.
强度计算只需要计算锅炉范围内的受压元件的强度计算。
附件 (0)
特种设备行业众包服务平台
